Search:tensile test machine universal test machine  ozone test chamber
Contact us

Dongguan Company

Add: Xinhe Management of 

area, Wanjiang District, 

Dongguan city, Guangdong

 province, China

Tel: +86 769 23388229

Fax: +86 769 23388227

Mobile phone:

       Homlin :  +86 135 5970 0919

       Leon      : +86 136 8898 5187


Dongguan Tianan Office

Rm. 1117, Building A1, Tianan 

Cyber Park, No. 1, Huangjin Road,

 Nancheng District, Dongguan, 

Guangdong, China (Mainland)

Tel: +86 769 23388225

Fax: +86 769 23388227

Mobile phone:

Connie: +86 137 1188 8650

Shelly:+86 136 8898 4470

       Shanghai Company

       Add: Building B 4-3, No.398, 

Jinglian Road, Minhang District,


Tel: 021-54399880-15

Fax: 021-64549471-12

HZ-6611 Polyether plastic Moisture Tester
    Plastic rapid moisture analyzer is the second best company for the plastic industry in the production, injection molding process control process due to the raw water is too large to cause the product to cracks, blistering, shrinkage and other series of phenomena to develop a state-of-the-artnew plastic moisture meter.The exterior of the product with no moving parts, no need to set the measurement sample time mode. Weighing system to the introduction of Germany advanced technology, to avoid the instability of the domestic magnetic sensor and easy aging shortcomings. The heating system uses halogen heat source device. Humane system operation, laboratory personnel without special training, can read the instructions. Chinese display, intuitive and accurate measurement results. Instant print function of a key operation, the standard 232 interface and special software can be achieved online, real-time data acquisition, analysis, storage, printing.


Equipment Summary:

Plastic Moisture Tester is the second best company for the plastic industry in the production,injection 

molding process control process due to the raw water is too large to cause the product to cracks,

blistering, shrinkage and other series of phenomena to develop a state-of-the-artnew plastic moisture 


The exterior of the product with no moving parts, no need to set the measurement sample time mode. 

Weighing system to the introduction of Germany advanced technology, to avoid the instability of the

 domestic magnetic sensor and easy aging shortcomings.

The heating system uses halogen heat source device.Humane system operation, laboratory personnel 

without special training, can read the instructions. Chinese display, intuitive and accurate measurement

results. Instant print function of a key operation, the standard 232 interface and special software can be 

achieved online,real-time data acquisition, analysis, storage, printing. 

The product has been widely cited to the different varieties of types of plastic industry raw materials,semi 

finished products such as the production process, such as: polyethylene (PE), polypropylene (PP), 

polyvinyl chloride (PVC),polystyrene (the PS), ABS resin (acrylonitrile - butadiene - styrene copolymer), 

polyamide (PA) is often referred to as nylon, polycarbonate (PC), polyoxymethylene (POM), modified 

polyphenylene ether, thermoplastic (PET), polyphenylene sulfide (PPS), liquid crystal polymer LCP, 

polyether ether ketone (PEEL), polyether ketone (PEK), polyether sulfone (PES), engineering plastics -

polysulfone (PSF) and so on.

  • Technical Parameter
  • Feature / Function
  • Standard
  • Main parts
  • Software / Controller

Technical Indicators:


HZ-6611 Polyether Plastic Moisture Tester

Weight range


Determination of moisture content

0.01% -100%

Weighing minimum reading




The heating temperature range

starting -205 ℃

Moisture content may readability


Display parameters

seven kinds

Communication interface

RS 232


 the 3a80 × 205 × 325 (mm)

Power supply

220V ± 10%


50Hz ± 1Hz

Working environment temperature

-5 ℃ -50 ℃

Relative humidity

≤ 80% RΗ

Net weight



Product Features:

1, the plastic industry-specific

2, automatic test mode

3 can be connected to computers and miniature printers

4, can be a quick test before and after the sample dehumidification

5, granules, powders operating

6,High efficiency, fast, 3 minutes

7, without any installation, commissioning and training

Site Map